CAB color chip application-Guangzhou Hui Hecai Pigments Co., Ltd._Color file_color paste _ color cake

Introduction to PU Color Chip

The color chip series of CAB is a pre-dispersing product of granular pigments. They are carefully selected organic and inorganic pigments which are pre-dispersed in a CAB resin system of medium viscosity. Its good consistency and dispersibility enable customers to prepare ideal color paste or finished paint in a very short time, and give the product excellent transparency, weather resistance and other characteristics. It is widely used in plastic paint, automobile paint, motorcycle paint and wood paint.

water-based color chip series is an efficient pre-dispersed product of granular pigment. They are carefully selected organic and inorganic pigments which are well-dispersed by special process treatment. The color chip product can easily dissolve in the water and be prepared for ideall colorant. It is suitable for all kinds of systems including acrylic, polyurethane, styrene-acrylic emulsion, rubber emulsion, etc. It has good compatibility with all kinds of resins.

This series of color chips is a granular color pre dispersion series product. Select high-performance, weather resistant, and transparent organic and inorganic pigments, which are pre dispersed in a special modified polymer resin system. And endow the product with superior bright and transparent properties, weather resistance, and other characteristics. Suitable for 3C coatings, automotive factory coatings, automotive repair coatings, automotive interior and exterior coatings, electric vehicle coatings, rail transit coatings, engineering machinery coatings, wood coatings, etc.

The transparent color chip is a predispersed powder pigment prepared with high performance organic pigment and chloroacetic resin as the carrier. This series of product has super fine particle size, extremely narrow particle size distribution, excellent tinting power, transparency, and saturation, also good flocculation resistance, and anti-precipitation. When using this series of pigment product, no grinding and dispersing agent is needed. The transparent color chip is the ideal colorant for reflective materials, traffic billboards, license plate film, and printing ink. In the absence of restriction of halogen requirements, this series can be recommended for paint, as a substitute for color paste. This series of product is dust-free, easy for transportation, and can be stored for a long time.

CAB color chip application

Disperse	Decentralized equipment	1. Disperse container 2. High speed dispersion mixer
	Operating Steps	1. Add solvent to the dispersion container according to the formula amount, and stir at low speed with a dispersion mixer of 400-600RPM
		2. Slowly add the recipe amount of color chips while stirring
		3. After adding all the color chips, increase the speed of the dispersion mixer (increase the speed to a linear speed>1500 meters/minute)
		4. Maintain a linear speed of>1500 meters/minute and stir at high speed for 1 hour (or until the fineness meets the requirements)
		Note: If there are high requirements for dispersion fineness and color phase, it can also be ground by a sand mill after step 4. Grinding by a sand mill can ensure that the color chips are fully dissolved, thus achieving the best effect.

To learn more about our products, click the button below and let's explore further: